Automotive Information

In most cases you can clean and protect your vehicle with just a few basic car cleaning products. In this article you will learn some of the science behind auto detailing supplies, so you can park your car cleaned properly.

Soil may be organic, non-organic or mineral oil. It is important to know. If you identify the soil you are dealing with the right cleaning solution. If you use the right cleaner, most stains with ease.

Use organic soil as an example. Organic means basically that of carbon. Spots in this group include proteins, animal fats, body oils, fungus, yeast, insects, bacteria and feces. The classic example is the party of hot french fries you spilled three years old in the back seat. This is an organic soil stain.

Non-organic land has no carbon molecules. We usually find these spots on the outside of the vehicle. A good example is that most of us get frustrated from time to time water stains from minerals. Acid rain-points fall into this category.

Finally we come to petroleum to come. These floors are made of materials that can not or will not be mixed with water. Motor oil, grease and road tar are the most common petroleum soils. Note that chewing gum is also a petroleum-based.

Now that you are of three types of stains, we can begin to discuss cleaners. Let me tell you, there are plenty of them. Unfortunately, no one has invented a real general-purpose automotive cleaner. The many different surfaces and floors, automotive cleaners complex mixtures of chemicals that are mixed in a particular type of surface or ground. The most commonly used chemicals including surfactants, solvents, wetting agents, chelating agents and saponifying.

Soaps and detergents with a surfactant. It is an agent that has two connectors. A molecule is attracted by the soil itself, while the other holds water. The compound that is attracted to water, is hydrophilic. Its mission is to provide the soil around. The floor pulls a water repellent. The goal is to break the ground so that the hydrophilic and receive in order to swim away.

All cleaning agents must solve a solvent in some form to the dirt and carry it away. Some solvents such as turpentine, petroleum land and can work on surfaces damaged by water need. Did you know that the most common solvent used to clean the water?

Speaking of water, a solution with a water or mixed with water has a pH value. The term pH is a measure of the relationship between hydrogen ions and hydroxyl ions. If you have more hydrogen ions than hydroxyl ions, which is an acid. Even if you have more hydroxyl ions than hydrogen ions is an alkali. Knowing this is important because a cleaning product that falls on both ends of the pH scale can cause severe damage.

The pH scale ranges from 0 to 14 The lower half of the scale for acids and bases, the upper half. As you may have guessed, the water is neutral and has a pH of 7.0.

If you know the pH of a cleaner, you know where to use them. A carpet shampoo must have a pH around 8 or 9, while should be a general purpose wheel cleaner 12 to 14 Try it with a wheel cleaner on the carpet and fabric of your car to make a pretty big mess.

Now that you understand the basics that you know why so many car care and auto detailing supplies have to know. Your car has many different areas and they have different cleaning requirements. You can use harsh detergents with basic protection. Wash the outside several times a year and protect the interior with the right products. Cover for the ultimate protection, use outdoor car or a waterproof car if you park outside.